Submit or Track your Manuscript LOG-IN

Black Seed Oil-Alginate Nanoemulsion Characteristics Utilising an Ultrasonicator at Pilot Plant Scale

Black Seed Oil-Alginate Nanoemulsion Characteristics Utilising an Ultrasonicator at Pilot Plant Scale

Shaiqah Mohd Rus1*, Anika Z.M.R.2, Awis Sukarni Mohmad Sabere3, Mohd. Rushdi Abu Bakar4,5, Farahidah Mohamed4 and Abd Almonem Doolaanea6*
 
 

1Pharmaceutical Technology Programme, Faculty of Pharmacy and Health Sciences, Universiti Kuala Lumpur, Royal College of Medicine Perak, Jalan Greentown, 30450 Ipoh, Perak, Malaysia; 2Advanced Manufacturing and Materials Center (AMMC), Institute of Integrated Engineering, Universiti Tun Hussein Onn Malaysia, 86400 Parit Raja, Batu Pahat, Johor, Malaysia; 3Department of Pharmaceutical Chemistry, Kulliyyah of Pharmacy, International Islamic University Malaysia, Jalan Sultan Ahmad Shah, 25200 Kuantan, Pahang, Malaysia; 4Department of Pharmaceutical Technology, Kulliyyah of Pharmacy, International Islamic University Malaysia, Jalan Sultan Ahmad Shah, 25200 Kuantan, Pahang, Malaysia; 5IKOP Pharma Sdn Bhd, Jalan Sultan Ahmad Shah, 25200 Kuantan, Pahang, Malaysia; 6Senior R and D Chemist, Sabrena Experience, 1500 Dragon Street, Suite 160 Dallas, Tx 75207, USA.


*Correspondence | Shaiqah Mohd Rus and Abd Almonem Doolaanea, Pharmaceutical Technology Programme, Faculty of Pharmacy and Health Sciences, Universiti Kuala Lumpur, Royal College of Medicine Perak, Jalan Greentown, 30450 Ipoh, Perak, Malaysia; Senior R and D Chemist, Sabrena Experience, 1500 Dragon Street, Suite 160 Dallas, Tx 75207, USA; Email: shaiqah.rus@unikl.edu.my, abdalmonemdoolaanea@yahoo.com 

ABSTRACT

Black seed oil (BSO) contains thymoquinone, an active ingredient that is well-known for its antioxidant property and used in food and traditional medicine. BSO is encapsulated in micrometre-sized alginate beads (AB), to increase its palatability. This encapsulation is established and produced on a small scale in the lab. To achieve the ideal BSO alginate nanoemulsion during large-scale manufacturing, it is vital to use suitable parameters where two parameters were manipulated: the flow rate of the pump and the percentage of the power (amplitude) of the ultrasonicator. The droplet size, PdI, and zeta potential of the nanoemulsion were investigated. The zeta potential values for BSO nanoemulsions ranging from -53.83 ± 1.50 to −63.50 ± 0.66 mV. All zeta values were below -30 mV, demonstrating that the nanoemulsions are stable emulsions. Each amplitude and flow rate produced BSO alginate nanoemulsion within the targeted droplet size, which is below 500 nm of the sonication process, except at flow rates 144, 216 and 288 mL min-1 at 30 % power of amplitude. The droplet size was found to be smaller at a lower flow rate. The smallest droplet size was achieved at 72 mL min-1 i.e., 346.57 nm to the power of 90% of ultrasonicator amplitude. For every flow rate of 70% and 90% power of sonication, the PdI of BSO alginate nanoemulsion was less than 0.700, The PdI ranges for these parameters are from 0.262 ± 0.005 to 0.627 ± 0.045. The higher the flow rate and the low percentage of ultrasonicator power, the larger the particle size of the BSO alginate nanoemulsion obtained. As the applied power of the amplitude increases from the optimal value (70%), the size of the emulsion particle decreases. It is discovered that the BSO alginate nanoemulsion particle size is influenced by the pump flow rate and ultrasonicator power.

To share on other social networks, click on any share button. What are these?

Sarhad Journal of Agriculture

September

Vol.40, Iss. 3, Pages 680-1101

Featuring

Click here for more

Subscribe Today

Receive free updates on new articles, opportunities and benefits


Subscribe Unsubscribe